Power

Standard:

 120 +/- 10% VAC, 50-60hz, 8 Watts

Optional:

 240 +/- 10% VAC, 50-60hz, 8 Watts

Optional:

 24 +/- 10% VDC, 8 Watts

Relay Configuration

Dual self-checking force-guided captive contact safety relays

Relay Contact Rating

8 amps @ 250VAC resistive for safety relays
4 amps @ 250VAC resistive for alarm relay

System Accuracy

+/- 1 millisecond

  Set Points

Drive failure:

 1 to 25 tenths of a second

Brake warning:

 1 to 999 milliseconds

Brake failure:

 1 to 999 milliseconds

  Display

Speed:

0 to 290 +/- 1 RPM
291 to 999 +/- 4 RPM

Stop Time:

0 to 999 +/- 1 msecs.

Indicators

Brake Fault – Red LED
Brake Warning – Yellow LED
Drive Failure – Red LED
Brake ON – Yellow LED
Ready – Green LED
Not Ready – Red LED
Stop Time Display – Red LED
RPM – Red LED
Brake Warning Setpoint – Red LED
Brake Limit Setpoint – Red LED

  Inputs

Encoder:

See Below

Clutch:

120 +/- 10% VAC

Output Circuit

Two captive contact self-checking N.O. relays in series.
Isolated (DRY) Normally open contacts --||--||--
Alarm relay will close when a warning or failure setpoint is exceeded.

Operating Temperature

0° to 50° C

Enclosure

Lockable NEMA 12 steel

Enclosure Dimensions

8” (203mm) Height x 7” (178mm) Width x 4” (127mm) Depth

Cable

20’ (6m) is supplied standard; 100’ (2540mm) maximum length.
Gauge: 20 AWG – 3 connectors plus drain
Rating: 300 VAC @ 60 C

Shaft Loading

Radial: 35 lbs.
Axial: 40 lbs.

Operating Temperature

0° to 50° C

Dimensions

5.5" (140mm) Height x 3.75" (95mm) Width x 3-9/16" (90mm) Depth

Warranty

1 year