PressCam 8 Junior Specifications

Input Power

3 Voltage Ranges:
24VDC (optional)
120VAC (standard)
240VAC (optional, jumper selectable)
All AC voltages work with 50 or 60 Hz
10 watts with all relays on

Fuses
I/O Board
F1 to F8	LS Outputs, 5A Fast Blow (20-023)
F7	Power, 1A Slow Blow (20-022)
F9 to F15	Die Inputs, 5A Fast Blow (20-023)
F35	12VDC, Fast Blow (20-023)

Fuses
Computer
F1	Power, 5A Fast Blow (20-023)

Display

Vacuum Fluorescent 4 lines/20 characters
-5V (GRN) D10

I/O Board
8 Optically coupled inputs (RED)
Power ON	D22
Brake	D21
Die 1-6	D15-D20
6 LS Outputs (GRN)
LS1-6	D1-D6

Set Points
Stroke Count:	0 to 999,999 strokes
Batch Count:	0 to 999,999 strokes
Quality Count:	0 to 999,999 parts
Part Count:	0 to 4 parts/strokes; 0 to 999,999 parts total
Batch Size:	0 to 999,999 strokes
Limit Switch Angle:	0 to 359 degrees
Limit Switch Timer:	0 to 9999 milliseconds
Die Sensor Angle:	0 to 359 degrees
Speed Compensation:	0 to 99 degrees
MIN SPEED:	0 to 999 SPM
MAX SPEED:	0 to 999 SPM
Brake Warning:	1 to 999 milliseconds
Brake Failure:	1 to 999 milliseconds
Brake Actual:	1 to 999 milliseconds (+/- ms accuracy)
Start Motion:	0 to 5.9 seconds (1/10 sec increments)
Drift:	preset to 2 (1/10 SPM increments)
Crank Angle:	0 to 359 degrees (1 degree increments)
SPM:	0 to 999 strokes/minute (+/- 1 SPM accuracy)

Enclosure Contruction
Stand Alone Unit:
All 18 gauge painted steel NEMA 12 lockable box with sealed front panel.
Dimensions: 7 1/4" (184mm) width; 9" (229mm) height; 3 1/4" (83mm) depth

Enclosure Contruction
Panel Mount Unit:
All 18 gauge painted steel NEMA 12 with gasket around edge.
Dimensions: 6 1/2" (165mm) width; 7 1/8" (181mm) height.

Resolver

+/- 1º Resolution up to 600 RPM (+/- 2º Resolution from 601 to 1000 RPM)
Shaft loading: Radial 400 lbs., Axial 200 lbs.
Standard cable 30' (9m). Maximum length of 600’ (183m).

Temperature

0 to 50º C

Print this Page Print this page

Need a Quote? Contact our Sales Department >>

Need Tech Support? Contact our Engineering Department >>

Bookmark Pressroom Site