Welcome to www.pressroomelectronics.com

Sales: (800) 937-4334
       Service: (630) 443-9343
 

 

 

Pressroom Electronics US Manufacturer of Press Controls

 
 
 

Resolver Based Options

Please consult factory for additional information: 

Expander Board #52-279 adds additional 6 Die inputs and 6 Dry relay contact outputs (At time of order) - Increases the Press Commander die protection from six (6) to twelve (12) station die protection. Also increases the
PressCommander programmable limit switch capacity from six (6) to twelve (12) programmable limit switches with mechanical relay (dry) outputs.

Expander power supply board #52-280 (At time of order) - Power Supply Board that stacks under the PressCommander Expander Board (52-279) and is required to power the Expander Board functions.


Request Both Part Numbers (52-279 and 52-280) at time of order if expansion is desired.

 

 

Main Power Disconnects
Fused main power Disconnect (IEC or NEMA)
Refer to Component section of this catalog for voltage, sizing and part numbers for starters and main power disconnects.

 

Magnetic Motor Starters
Motor Fwd/Rev switch gear with legend plates (included with Reversing Starter purchase)
Motor Fwd only switch gear with legend plates (included with Non-Reversing Starter purchase)
Magnetic motor starters (IEC or NEMA)

Refer to Component section of this catalog for voltage, sizing and part numbers for starters and main power disconnects.

 

 

Remote Master Control Station (Free standing operator control station) PressCommander Display Extender System
Moves all the switch-gear and Display (standard or touchscreen) unit into a separate 12" x 14" x 8" box that can be placed closer to the operator. The control boards, optional starter(s), optional disconnect remain in a separate Control panel whose size is dictated by the size of the starter(s) & disconnect.   
NOTE: Cables are available in 15’, 25’, 35’, and 50’ lengths. These cables should never be cut between the Remote Master Control Station and Control panel.

 

 

Micro-Inching Function (includes key switch on/off)

Light Guard on/off supervisory controlled key switch (up to four curtains)

Multiple operator station control key switch

Bar Turnover Function (includes key switch on/off)

Die Block receptacle outlet

Shutdown timer (software based)

110VAC outlet or 220 VAC outlet (specify load)

NEMA Style Indicators & Switch gear on control panel to replace IEC Style supplied standard

AUTOMATIC EXTERNAL TRIP:
PCS-10 without IEC switch gear (at time of purchase)

PCS-20 with IEC switch gear (key switches & push buttons)

30-012 24vdc @ 2.2A power supply (90-260vac In) 3.9" L x 3.8" W x 1.4" H (99.1mm x 96.5mm x 35.6mm)
for powering sensors or other auxillary devices

 


CONTINUOUS ON DEMAND:

PCS-10 without IEC switch gear (at time of purchase)

PCS-20 with IEC switch gear (key switches & push buttons)

Custom Software Programming (one time fee)

Software can be upgraded in the field with a laptop computer

 
REMOTE MONITORING:
 (internet based)

Ethernet 100baseT with built in Web page Server (with downtime monitor and logging)

Wireless Ethernet (Wi-Fi) Bridge - Part # 39-154


GUARDING:

Safety Light Curtain (up to four sets of pylons, specify size) (Visit www.pinnaclesystems.com for models available)

 

HYDRAULIC OVERLOAD:

Press will stop when output opens, then allows the press to be moved in the inch mode with the input still open.

 

 

PEAK TONNAGE MONITORING: (add suffix T1,T2,T3,or T4 to Presscommander Model#)

T1 - One channel monitoring with strain sensor and cable

T2 - Two channel monitoring with strain sensor and cable

T3 - Three channel monitoring with strain sensor and cable

T4 - Four channel monitoring with strain sensor and cable

 

 

SIGNATURE TONNAGE ANALYSIS MONITORING (Requires 10.1" Touchscreen - Part # 39-151)

Add suffix: T1-S, T2-S, T3-S, T4-S to the PressCommander Model.

T1-S - One channel monitoring with strain sensor and cable
T2-S - Two channel monitoring with strain sensor and cable
T3-S - Three channel monitoring with strain sensor and cable
T4-S - Four channel monitoring with strain sensor and cable

  
 
 

Print this Page Print this page

Pressroom eNewsletter
Subscribe to our mailing list and you will receive information on new products, Trade Show appearances and answers to your questions.

Need a Quote? Contact our Sales Department >> 

Need Tech Support? Contact our Engineering Department >>

Pressroom Electronics