Controller

Power:

Standard:
Optional:
Optional:

120 +/- 10% VAC, 50-60hz, 8 Watts
240 +/- 10% VAC, 50-60hz, 8 Watts
24 +/- 10% VDC, 8 Watts

Relay Configuration:

Dual self-checking force-guided captive contact safety relays

Relay Contact Rating:

8 amps @ 250VAC resistive for safety relays
4 amps @ 250VAC resistive for alarm relay

System Accuracy:

+/- 1 millisecond

Set Points:

Drive failure:
Brake warning:
Brake failure:

1 to 25 tenths of a second
1 to 999 milliseconds
1 to 999 milliseconds

Display:

Speed:

Stop time:

0 to 290 +/- 1 RPM
291 to 999 +/- 4 RPM

0 to 999 +/- 1 msecs.

Indicators:

Brake Fault – Red LED
Brake Warning – Yellow LED
Drive Failure – Red LED
Brake ON – Yellow LED
Ready – Green LED
Not Ready – Red LED
Stop Time Display – Red LED
RPM – Red LED
Brake Warning Setpoint – Red LED
Brake Limit Setpoint – Red LED

Inputs:

Encoder:
Clutch:

see below
120 +/- 10% VAC

Output Circuit:

Two captive contact self-checking N.O. relays in series.
Isolated (DRY) Normally open contacts --||--||--
Alarm relay will close when a warning or failure setpoint is exceeded.

Operating Temperature:

0° to 50° C

Enclosure:

Lockable NEMA 12 steel

Enclosure Dimensions:

8” (203mm) Height x 7” (178mm) Width x 4” (127mm) Depth