Exceeds OSHA
& ANSI Standards
Quick & Easy Installation
Control Reliable Design (Triple CPU Redundancy)
Incorporates dual logic power supplies
Heavy duty resolver supplied standard with self-checking input
on every press cycle and 30' of resolver cabling supplied standard
Complete system diagnostics and programming in plain English/Spanish
by a four line by twenty character vacuum fluorescent display
Operates at 24VDC, 110VAC
Major faults such as E-Stop, motion, brake monitor, and sensor
faults are handled by two force-guided relays (Form B safety relays)
Modes of operation: off--inch--single--continuous
Continuous ARM; top stop, anti-tie down and anti-repeat built-in
System start/stop functions
SPM Range -1 to 500 strokes or cycles per minute
Password and supervisory controlled keyed selector switch for
security of data entry
Interrupted stroke provision with indicator
Inch mode monitoring aides machine set-up
Crank angle and speed readout (SPM)
Time-based brake monitor
Built-in motion detector and drift fault
90° and 270° stop time tester/meter built-in
Built-in variable speed compensation
Servo-feed interface built-in
Six optically isolated die protection inputs that can be either
AC or DC (sourcing or sinking)
Six limit switch outputs can be set to cycle (non-timed) two times
per crank rotation by setting an open/close crank angle (AC or DC
@ 3A)
The last three limit switch outputs can be set for timed, non-timed,
delay, hold, or cycle two times per crank revolution. (AC or DC
@ 3A)
Six PLS (programmable limit switch) output relays are small, high
speed, and high capacity (AC or DC @ 3A)
100 job memory (removable)
Stroke, batch, quality, and part counters
Batch counter output relay
Die protection output relay (opens when there is a fault)
Speed output relay (opens when machine speed falls out of the
max/min parameters)
Auxiliary output relay (customer assigned usage)
Optional tonnage monitoring
Add starters, disconnects & additional non-safety controls
if necessary
PC Link to allow offline job creation and storage
Safety
relay controller built-in
Two-year warranty
Made in the USA
