| images/presscommander.png |
Presscommander
Exceeds OSHA 1910.217 & ANSI B11.1-2009, "Control
Reliable Design," Dual logic power supplies, Heavy duty resolver, System diagnostics and
programming in plain English/Spanish, Can control up to four sets of operator stations, Major
faults such as E-Stop, motion, brake monitor, and sensor faults are handled by two
force-guided relays (Form B safety relays), Off--inch--single--continuous, Continuous ARM;
top stop, anti-tie down and anti-repeat, SPM Range -1 to 500, Password and supervisory
controlled keyed selector switch for security of data entry, Interrupted stroke provision
with indicator, Inch mode monitoring, Crank angle and speed readout (SPM), Time-based brake
monitor, Built-in motion detector and drift fault, 90° and 270° stop time tester/meter
built-in, Built-in hour meter for maintenance, Built-in variable speed compensation,
Servo-feed interface built-in, Six optically isolated die protection inputs, Six PLS
(programmable limit switch) output relays, 100 job memory (59 with optional expander board),
Stroke, batch, quality, and part counters, Batch counter output relay, Die protection output
relay, Speed output relay,Auxiliary output relay, Optional Ethernet or DeviceNet
and PC Link to allow offline job creation and
storage.
|
| images/press_cam8_large%20B.png |
PressCam
8
PressCam 8 is a "control reliable"
resolver based programmable cam switch, time-based brake monitor, multiple counters, and much
more in one package. The system contains 16 die protection inputs and
two 16-bit computers that are configured to cross check
each other and the resolver. The dual computers are interfaced with a
full view 8" (203mm) diagonal LCD computer screen for viewing and programming ease. This
large operator screen supplies operators and front line supervisors production data without
the need of cumbersome menu and program access codes. The PressCam 8 has a large 100 job
memory.
|
| images/presscam8_jr_photo.gif |
PressCam 8
Junior
The PressCam 8 Junior is a resolver-based press
automation controller that incorporates six die protection inputs, a programmable cam limit
switch, timed-based brake monitor, servo feed control, four counters, and a die protection
system The PressCam 8 Junior is controlled by a 16-bit computer that constantly checks the
resolver for accuracy. The PressCam 8 Junior has a large 99 job
memory.
|
