|
|
 Resolver
Based 16 Station Die Protection in PressCam 8
11 Programmable Switches (PLS)
The Ultimate is the most feature intensive
air clutch punch press control available. The control conforms to all current
OSHA and ANSI standards for control reliability and component monitoring.
System incorporates the PressCam 8 for complete punch press synchronization
and flexibility for all peripheral punch press signaling needs such as feeds,
die protection, lubrication, blow-offs, etc. All of the electrical timing
adjustments for the complete press operation are done at the floor level
by the operator. The PressCam 8 system also has a large job memory of 75.
This gives the control the ability to remember 75 complete different jobs
or die set-ups at the press. The memory concept at the press is an excellent
feature due to the tremendous time saved during set-ups of various operations.
Additional time is saved by being able to adjust or "fine tune"
the stamping process while the press is running, which is an aid in maximizing
press utilization.
View product information for the PressCam 8
View product information for
the 3200 SS Control System
Standard
Features
- Control
Panel 3200 conforms
to all current OSHA and ANSI standards.
- 11 cam programmable limit switch.
- Dual redundant outputs for all faults
such as brake monitor, motion detector, etc.
- Built-in motion detector with fast response
and dual speed limits.
- Brake Monitor - Time-based brake monitor
with a digital display of both the brakes stopping time and the brake
fault limit set points in milliseconds. System also displays a brake
fault when stopping times are exceeded.
- Refer to PressCam8
for specifics
- Built-in tachometer (SPM) and crank shaft
angle in degrees with simultaneous digital display.
- 4 Built-in counters: stroke, batch, quality
and part.
- Built-in timers, adjustable from 1 ms
to 10 seconds.
- 16 station die protection system (self-contained
cyclic functions and 2 static functions), built-in with separate timing
windows for each station based on the absolute position of the crank-shaft.
All the die protection timing windows are retained in the memory until
the next time a particular die is set-up and run. Die protection timing
windows can also be adjusted while the press is in motion.
- All the functions of the system that
are timed or signaled through the PressCam system can be retained in
memory for 150 different die set-ups.
- All the operator timing adjustments are
done at the floor level which eliminates the need for electricians to
adjust rotary cam switches and microswitches.
- System self-diagnostics.
- Program security from tampering
1. Keyed selector switch for supervisory control.
2. Authorized code for program entry.
- Accuracy +/- 1° for all timing circuits
and can be "fine tuned" while the press is cycling.
- Eases the timing of all types of feeding
equipment, AC and DC servo feeds and air feeds.
- Very easy to program and use.
- System designed specifically for the
metal stamping/metal forming industry.
- Main power disconnect and magnetic motor
starters can be housed in the same control panel.
- Tonnage Monitoring optional.
|
