|
|
- “Control Reliable” design,
utilizing two 16-bit computers, provides ultimate pressroom safety in
automation.
- Operator “full view” of system
status means no getting lost during programming.
- PressCam’s two 16-bit computers
are configured to cross check each other and the resolver.
- All safety function faults utilize three
(3) monitored captive contact safety relays for the outputs related
to motion detection, brake monitoring, and system self-checking (Form
B safety).
- Non-volatile job memory of 100 stored
programs recalled by job or die number for all system functions.
- Eleven programmable limit switch outputs
with multiple
ON/OFFs per press cycle.
- Outputs can be solid state (AC or DC)
or mechanical relays.
- 16 Station Die
Protection System
- Supervisory controlled run/program key
switch with password protection.
- Built-in time-based brake monitor can
issue warnings or a stop command when actual stopping time exceeds programmed
set points.
- Built-in motion detection fault output
should the press not start moving within the timed set point after the
brake signal is given.
- Built-in drift detection fault output
if the press moves when it should not.
- Built-in 90º and 270º stop
time tester.
- PressCam cloning feature allows multiple
PressCam units to link via RS-232 for job copying.
- Contrast adjustment of the LCD computer
screen.
- Automatic offset programming.
- Built-in press tachometer (SPM).
- Optically isolated AC and/or DC inputs
(sourcing or sinking).
- Parts counter which can be programmed
from 1 - 4 parts per press cycle for multiple out dies.
- Large 8” (201mm) diagonal computer
screen (LCD).
- Unique digital programming knob acts
like a PC mouse and eliminates keypad programming.
- The “control reliable” PressCam
8 can be used to supply the timing signals for the clutch/brake press
control.
- Complete system diagnostics with plain
English fault messages on the operator screen enhances productivity
(Spanish/French languages available).
- PressCam 8 programs can be field upgraded
or customized using a PC computer with a standard serial port.
- Four programmable timed limit switch
outputs that can be position based or timed from 0 to 9999 milliseconds.
- Five Counters: Strokes, Parts, Batch
Counter, Batch Size, and Quality Counters.
- Built-in power supply for input sensors
(+12VDC).
- Built-in servo feed interface.
- Crank shaft angle displayed in degrees
with a graphic shaft angle clock.
- Utilizes surface mount technology.
- Job memory chips are socketed for easy
transfer to other units if desired.
- Programmable upper and lower speed limits
with captive contact safety relay output (Form B safety).
- Variable speed compensation.
- Punch press clutch/brake timing signals
protected from tampering.
- Peak tonnage monitoring 1 to 4 channels
(optional).
- Compact in size.
- Safety relay controller
built-in
|
