|
|
|
The User Friendly
PressCommander™
Available in any control panel layout or
retrofits easily into an existing control panel
Standard Safety/Automation
Features:
- Exceeds OSHA 1910.217 & ANSI B11.1-2001
- Quick and Easy
Installation
- Control Reliable Design (Triple CPU Redundancy)
- Incorporates dual logic power supplies
- Heavy duty resolver supplied standard
with self-checking input on every press cycle and 30' of resolver cabling
supplied standard
- Complete system diagnostics and programming
in plain English/Spanish/French by a four line by twenty character vacuum
fluorescent display
- Can control up to four sets of operator
stations
- Operates at 24VDC, 110VAC, or 240 VAC/440
VAC
- Major faults such as E-Stop, motion,
brake monitor, and sensor faults are handled by two force-guided relays
(Form B safety relays)
- Modes of operation: off--inch--single--continuous
- Continuous ARM; top stop, anti-tie down
and anti-repeat
- System start/stop functions
- SPM Range -1 to 500
- Password and supervisory controlled keyed
selector switch for security of data entry
- Interrupted stroke provision with indicator
- Inch mode monitoring
- Crank angle and speed readout (SPM)
- Time-based brake monitor
- Built-in motion detector and drift fault
- 90° and 270° stop time tester/meter
built-in
- Built-in hour
meter for maintenance
- Built-in variable speed compensation
- Servo-feed interface built-in
- Six optically isolated die protection
inputs that can be either AC or DC (sourcing or sinking)
- Six limit switch outputs can be set to
cycle (non-timed) two times per crank rotation by setting an open/close
crank angle (AC
or DC @ 3A)
- The last three limit switch outputs can
be set for timed, non-timed, delay, hold, or cycle two times per crank
revolution (AC
or DC @ 3A)
- Six PLS (programmable limit switch) output
relays are small, high speed, and high capacity (AC
or DC @ 3A)
- 100 job memory (removable)
- Stroke, batch, quality, and part counters
- Batch counter output relay
- Die protection output relay (opens when
there is a fault)
- Speed output relay (opens when press
speed falls out of the max/min parameters)
- Auxiliary output relay (customer assigned
usage)
- Optional tonnage monitoring
- Optional Ethernet
or DeviceNet communication
- PC Link to allow offline job creation
and storage
- Safety relay controller
built-in
- Optional Tonnage
Monitoring
- Two-year warranty
Optional
Feature:
- PressCommander™
Expander Board - Part # 52-279
Description: Increases the PressCommander™
die protection from six (6) to twelve (12) station die protection. Also
increases the PressCommander™ programmable limit switch
capacity from six (6) to twelve (12) programmable limit switches with
mechanical relay outputs.
|
